Features:

• Added controls to the Button Bar Remote Control Unit (BBRCU)
• Selection of the active Color Space in use by pressing F1.
• Selection of the SDI or HDMI input or output, by pressing F5, (formerly the Record button).
• Button illumination is now adjustable, so that you can adjust the brightness of the backlight to match the
  environment you are in.

• Enhanced SDR/REC709 color space to target measurements of below 2.3 deltaE 2000
• Calibration now provides industry-standard calibration of REC709 at 100 Nits.
• PDF Report of the REC709 calibration result available when calibration is complete.
• HDR (PQ and HLG – both in legal range) provide preview grade quality viewing.

Firmware Update Procedure:

1. Unzip the ATOMNEO.zip file and copy the ATOMNEO.FW Firmware to your SSD drive.
2. Ensure that your NEON is not powered on.
3. Insert the SSD into the NEON.
4. Power on your NEON.
5. The NEON will display the progress of the upgrade on screen.
6. The device will turn off and delete the firmware file after completing the installation.

For further information and troubleshooting, click here.